Our Products 

Circular steel pipe – a multi-functional rolled steel product with a circular cross-section. This material is quite durable and long-lasting. These pipes tend to be divided into pipes with a seam and seamless pipes. Pipes with a seam may be tested and they can be suitable for the construction of water and gas pipes, but these pipes are mainly used for construction purposes, while seamless pipes are also used in mechanical engineering, gas pipes, and other specific buildings requiring special durability.

Nowadays, this is one of the most common types of rolled metal products. Pipes with square or rectangular cross-sections are called profile pipes. The most popular raw material is steel, but stainless steel and aluminium profile pipes are also quite common. Profile pipes are produced using cold and hot deformation technologies, and the weld is fixed by electrical welding.

Flat steel iron or strip. Hot-rolled steel product with a sheet-like cross-section. It is used in the industry for manufacturing of pipes, angles, profile materials and other products. The material is also widely used in construction, as a connecting or reinforcing element. There are two types of flat iron, i.e. flat iron of ordinary precision and flat iron of increased precision (calibrated). Further use allows for additional processing – drilling, perforating, galvanizing, thus giving the material additional properties.

Corrugated sheets are hot-rolled sheets with a corrugated pattern. They are more commonly used for different floors, steps because the corrugation ensures anti-slip effect. There are usually two types corrugation - drop-shaped or diamond-shaped. They are produced in the following sizes - 1500x3000 mm, 1500x6000 mm.

Rifled aluminum sheets are available in thickness from 2 mm. Standard sheet sizes 1000x2000, 1250x2500, 1500x3000

Periodic profile rebar - corrugated steel bars for reinforcing concrete structures. Rebars: a set of interlinked elements which, when interacting with concrete, absorb a load and can be used in the compression area, in columns. In general, two types of rebarss are used in the construction, i.e. cold-rolled (indicated by letter A) and hot-rolled (indicated by letter B). Hot-rolled products are usually produced in the form of bars, and cold-rolled products - in the form of rolls. Periodic profile rebars are distinguished by a special resistance to stretching. Conventional structural steel grades are S235, S275, S355, respectively; these numbers denote resistance level measured in N/mm2. For B500 grade rebars this indicator is 500N/mm2, which is more than twice as much as a normal steel.